A cascade for the pool surround designed to create an intense yet deeply relaxing curtain of water. Manufactured from mirror-polished AISI 316 stainless steel.

A wall-mounted cascade designed to create an insense yet deeply relaxing curtain of water.Manufactured from mirror-polished AISI 316 stainless steel.

Specially designed to create a small water curtain with a moderate water flow, providing a relaxing massage to the back and shoulders areas, through theapplication of one or two elements, respectively. This accessory is 100% mirror-polish AISI 316 stainless steel.

Wall-mounted water jet featuring cylindrical cross- section. Designed to produce multiple high-pressure water jets for a back and shoulder massage of medium intensity, depending on model. This accesory is 100% mirror-polish AISI 316 stainless steel.

Comprised of a set of water jet nozzles in mirror-polish stainless steel which, when situated and directed correctly, provide a flow of water using recycled pool water. Creates water currents of varying strenghts.

A front- on cacade designed to create a moderate flow curtain which appears tpo slide down a glass surface. Water curtain lenght: 2000 mm. This accessory is manufactured from mirror-polished stainless steel, comprising a circular cross - sectioned water supply and a pointed metal sheet which directs the water onto the vertical glass surface. The water supply is situated on the sides of the cascade, connected to the tubing via a screw thread. Does not feature an accumulator casing.

A wall-mounted cascade designed to create a moderate flow curtain which appears to slide down the surface of the wall. This accessory is manufactured from mirror-polished AISI 316 stainless steel. The cascade is comprised of a rectangular cross - sectioned deposit, situated at the bottom of the accessory with a stabilising filter and a pointed stainless steel sheet which directs the water onto the wall. Water curtain lenght: 2000 mm or 4600 mm.

Featuring swans-neck shaped cylindrical section, providing a high-prssure jet of water for a relaxing massage. This accessory is made from polished AISI 316 stainless steel and has to be ordered with the anchor plate for secure installation. Features 4 interchangeable nozzles:

• A) Uniform pressure nozzle
• B) Double pressure nozzle
• C) Diffuser spray nozzle
• D) Fan spray nozzle

The bithermal shower features seven hot and cold water points which follow an indidually programmed sequence. This unit comprises of three polished stainless steel panels. Two panels face each other, with three openings in each where there are six water outlets situated at 30,60 and 90 cm from the floor providing a massage to the calves, thighs and hips, with

a seventh water outlet housed within a higher opening. The inner part of these panels houses the internal water distribution circuit and the valves. A push button control and thermostat are also built in to the system.

Cold fine mist effect troghout the shower cabin, especially designed to alternate and contrast with heat tratment. The unit is comprised of two built in polished stainless steel panels measuring 180x1600x800 mm which face each other. The extractable front piece measures 1700x900 mm and feature an enamel finish and 32 special fine nozzles. The inner part of these panels houses the internal water distribution circuit and the valves. A push button control and thermostat are also built in to the system.

Shower with an enveloping fine cold rain effect. The unit comprises of a polishes stainless steel panel with holes in it which is recessed push button control. Possibility to insert Aromarium with electronic dosing pump.

Hydromassage jet system, specifically designed to be situated in areas where there are benches, water channels, etc. Wherever an intense, localised massage is required. The acceleration of the water jet resulting from the venturi effect creates thousands of tiny air bubbles which further intensify the massage effect.This accessory is 100% mirror-polish AISI 316 stainless steel with interchangeable nozzles.

Set comprising three massage effect nozzles, using a combination of water and air to stimulate calves, thights and hips. These are hung in a vertical arrangement on the pool' wall, at a height of 20, 60 and 90 cm from the pool bottom. The set is completed with a polished rounded stainless steel handrail which can either be attached to the pool surround or the wall of the pool itself. This handrail serves two functions - it gives pool users something to hold onto whilst at the same time, allows air to enter through holes situated along its lenght which is then directed to the nozzle by the so-called venturi effect.

Elongated pool floor massage effect air bubble generator. The casing is made from polished stainless steel in the form of a long snake, to be installed in pool floors. The steel shheting has holes along its lenght to allow the bubble to escape and create the desired effect.

Ergonomically designed massage accessory with air jets in the bak, lumbar and leg regions. The bed is comprised of stainless steel casing with air holes situated in the key massage areas. The range includes both a single and double model.

Manufactured in AISI -316 stainless steel and ergonomically designed to provide maximum comfort. The system is based on air which in injected though the base of the lounger, providing a muscle-relaxing massage. Model to be installed in the pool shell during construction or model to be installed on column, perfectly adaptable to the depth of whatever pool it is to be istalled in. Includes a handrail which can be situated on either side of the lounger.